SCB1R Series Close Loop Hall effect Current Sensor
Closed-loop (compensated) current sensor based on Hall effect measurement principle.
The isolation voltage between primary and secondary is greater than 3000VAC.
Can measure DC, AC, pulse, and various irregular waveforms under isolated conditions.
Very low temperature drift, zero drift, fast response time, good linearity, accuracy can reach 0.1%.
Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations.
Drawing & Wiring:
1. Size error: ±1mm;
2. Primary aperture: φ20mm;
3. Fastening hole: φ4.5mm*2;
4. SCB1R Output Terminal: 282404-1/AMP;
5. The IP indication direction is the positive direction of the current, and the OFS is the zero adjustment;
6. Incorrect wiring may cause damage to the sensor.