SCY13 Series Hall effect Open Loop Current Sensor
Based on Hall effect measurement principle, open loop circuit mode.
The isolation voltage between primary and secondary is greater than 3000VAC.
Can be opened and closed up and down, no need to disassemble the busbar, easy to install.
Comply with UL94-V0 flame retardant rating.
Lead output, automotive connector.
Can measure DC, AC, pulse, and various irregular waveforms under isolated conditions.
Wide measurement range, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity.
Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations.
Dimension & Wiring:
1. Size error: ±0.5mm;
2. Primary aperture: φ24mm;
3. SCY13 wire rubber shell: 04T-JWPT-VSLE-S/JST,
4. SCY13A wire shell: 2520H-04/ECI,
5. The IP indication direction is the positive direction of the current;
6. Incorrect wiring may cause damage to the sensor.